Purpose
This article provides step-by-step instructions for installing a Konica Minolta bizhub C361i printer equipped with a Fiery IC-420 v2 controller in Raymond Fitz Hall room 238.
Prerequisites
Before beginning, ensure:
- The Mac is connected to the appropriate UD network.
- The printer is powered on and connected to the network.
- The Fiery controller IP address is available.
- Administrator permissions will be required.
- The macOS version has been identified.
Step 1: Download the Fiery Printer Driver
- Open a web browser.
- Navigate to the official Fiery Driver Download website: https://www.fiery.com/support-and-downloads/download-registration/
- Register for the Download Center Access and click Submit.
- Select Konica Minolta as the manufacturer/partner.
- Select the Printer bizhub 251i/C301i/C361i/C451i/C551i/C651i/C751i
- Select the Fiery IC-420 v2.0 controller.
- Select the driver compatible with the installed macOS version.
- Click Find Drivers.
- Click Download.
- Scroll to the bottom to Accept the Fiery Software End User License Agreement.
- Open the downloaded file.
IMPORTANT: Verify that the driver is for IC-420 v2, not IC-420 v1 or a generic Konica Minolta printer driver.
Step 2: Install the Fiery Printer Driver
- Open the downloaded .dmg file.
- Locate and launch the Fiery Printer Driver installer (.pkg).
- Follow the on-screen installation instructions.
- Enter administrator credentials if prompted.
- Install the Printer Driver Only.

- Click Continue to install only the driver.
- Complete the installation.

If replacing an existing Fiery driver, use the Fiery Software Uninstaller to remove the older driver before installing the new version.
Step 3: Add the Printer in macOS
- Click the Apple menu.
- Open System Settings.
- Select Printers & Scanners.
- Click Add Printer, Scanner, or Fax.
- Select the IP tab at the top middle.
- Enter the following printer configuration: 10.2.64.95 for the IP address; name the printer ID: G35836, and change Use from Generic PostScript Printer to Select Software:

- Choose the Fiery ES IC-420 PS Color Server 2.0US and click OK:

- Click Add.
- Adjust the Finisher options:
- Finisher options: Floor type staple finisher (100 sheets)
- Optional trays: Tray3 + tray4
- Saddle unit: Saddle unit (Floor type staple finisher)

- Allow the printer installation to complete.
Step 4: Verify Printer Configuration
- Return to System Settings - Printers & Scanners.
- Select the newly installed printer.
- Open Options & Supplies, if available.
- Verify the printer's installed accessories and configuration.
- Confirm that the appropriate paper trays, duplex printing, and finishing options are available.